Mouse
- Select: drag devices, click one to open its CLI and details.
- Connect Cable: click device A, then device B. Ports are picked in order.
- Test Packet: click source (PC or router), then destination. Sends one ping to the destination's IP.
- Delete tool, or Delete key on a selected device or cable.
PC CLI
ip 192.168.1.10/24 192.168.1.1
ip 192.168.1.10 255.255.255.0 192.168.1.1
show ip (or ipconfig)
ping 192.168.1.1
ip clear
Router / switch CLI (Cisco IOS style subset)
enable
configure terminal
hostname EDGE1
interface g0/0 (router) | interface fa0/1 (switch)
ip address 192.168.1.1 255.255.255.0
no shutdown
shutdown
end
show ip interface brief (router)
show interfaces status (switch)
show running-config (simplified)
ping 192.168.1.10 (router only)
? (list supported commands)
Abbreviations work: conf t, int g0/0, sh ip int br, no shut.
Limits (read these)
- Switches are plain flood domains: no VLANs, MAC table, trunks or STP.
- Routers use connected routes only: no static routes, OSPF, DHCP, NAT, ACLs.
- ICMP echo only. Reply path is checked, so a missing gateway on the far PC makes a ping fail.
- CLI imitates IOS wording but is NOT real IOS. Output may differ from real devices.
- Timings are simulated, not measured.
- The first ping across a hop may drop one packet (ARP), as on real gear.